Step G. Save Configuration And Initialize; Save To Binary File; Print Configuration; Initialize Logical Drives - HP D5970A - NetServer - LCII Configuration Manual

Chapter 5

Step G. Save Configuration and Initialize

In this step, you will do the following:
Save the configuration to a binary file
Print a copy of the configuration
Initialize the logical drives if you have not done so already

Save to Binary File

To save the configuration to a binary file:
1. Choose Save from the Configuration menu. The Save Configuration
dialog box appears.
2. Type the file name and directories to be used to save the configuration.
The file type should be *.cfg.
3. Click Save to save the configuration to the designated file.

Print Configuration

To print a copy of the configuration:
1. Choose Print from the Configuration menu.
2. Keep a copy of configuration Worksheets A and B together with the
printed copy of your configuration file. They help you understand your
configuration, or communicate with HP Customer Support.

Initialize Logical Drives

If you have not done so already, you must initialize your logical drives.
CAUTION
Initializing a logical drive destroys all data currently on the
disk modules.
Configuration
55