Select Another Server-Adapter Pair - HP D5970A - NetServer - LCII Configuration Manual

Chapter 8
If HP NetRAID Assistant is started on a client or server that can access
integrated HP NetRAID controllers (or HP NetRAID Series adapters) over the
network, you must select the server you want to access. The HP NetRAID
Assistant Main window has a Server pull-down list next to the Adapter pull-
down list.
When you select a server from the server selector box on HP NetRAID Assistant,
a window appears with the choice of access modes: Full Access and View Only.
Select one.
Full Access mode requires that authorized users enter a password. The
password is case-sensitive. The password must be given before full access
can be established to a server, and each server can require a unique
password. Full Access mode activates features that let you change the HP
NetRAID configuration and the states of physical and logical drives. For
example, in Full Access mode, you can initiate recovery from a disk
failure, or make a new hot spare.
View Only mode does not require a password, and does not permit users
to change the configuration. All menu selections that would change the
configuration are inactive. Examples of operations that you can perform in
View Only mode are displaying the properties of physical and logical
drives and viewing the configuration.
NOTE You cannot enter Full Access mode on a server if it is already
being managed by HP NetRAID Assistant in Full Access
mode, or by another HP NetRAID utility. However, View Only
mode can always be entered.
The only distinction the Main Screen shows between the Full Access and View
Only modes is that in View Only mode various actions are inoperative and the
related menu options are grayed out.
To change to another adapter within the server, use the Adapter pull-down list.

Select Another Server-Adapter Pair

Use these pull-down lists on the HP NetRAID Assistant Main Screen to select the
next server-adapter pair to be viewed or modified.
88
Managing Servers Over the Network