HP P2000 Reference Manual page 19

177
Info. Cache data was purged for the indicated missing volume.
Recommended actions
• No action required.
181
Info. Controller network port parameters have been changed.
Recommended actions
• No action required.
182
Info. All disk channels have been paused. I/O will not be performed on the disks until all channels are
unpaused.
Recommended actions
• If this event occurs in relation to disk firmware update, no action is required. When the condition is
cleared, event 183 is logged.
• If this event occurs and you are not performing disk firmware update, see
resolving problems
183
Info. All disk channels have been unpaused, meaning that I/O can resume. An unpause initiates a rescan,
which when complete is logged as event 19.
This event indicates that a problem reported by event 182 is resolved.
Recommended actions
• No action required.
185
Info. An enclosure management processor (EMP) write command has completed.
Recommended actions
• No action required.
186
Info. Enclosure parameters have been changed by a user.
Recommended actions
• No action required.
187
Info. The write-back cache has been enabled.
Recommended actions
• Look for event 188.
188
Info. Write-back cache has been disabled.
Recommended actions
• If event 187 is not logged within a reasonable amount of time, see
resolving problems
on page 3.
on page 3.
HP P2000 G3 MSA System Event Descriptions Reference Guide
Resources for diagnosing and
Resources for diagnosing and
19