HP P2000 Reference Manual page 28

262
Info. In-band SES commands have been enabled.
Recommended actions
• No action required.
263
Warning The indicated disk spare is missing. Either it was removed or it is not responding.
Recommended actions
• Replace the indicated disk.
264
Info. The link speed of the port bypass circuit and interconnect mode has been set to the default.
Recommended actions
• No action required.
265
Info. Port bypass circuits currently use the service port, which may limit the link speed or interconnect mode
support.
Recommended actions
• Perform a system-level shutdown and restart. Note that this will cause all data to be unavailable for
about 1 minute.
266
Info. A volume-copy operation for the indicated master volume has been aborted.
Recommended actions
• No action required.
267
Error While cleaning up resources in metadata at the end of a background rollback process, the firmware found
at least one error and suspended the process for the indicated volume.
Recommended actions
• Make sure that disks and vdisks associated with the rollback do not have problems (health OK, status
FTOL or UP) and then retry the rollback.
268
Info. A background volume-copy operation for the indicated master volume has completed.
Recommended actions
• No action required.
269
Info. A partner firmware update operation has started. This operation is used to copy firmware from one
controller to the other to bring both controllers up to the same version of firmware.
Recommended actions
• No action required.
28