Events Sent As Indications To Smi-S Clients - HP P2000 Reference Manual

Events sent as indications to SMI-S clients

If the storage system's SMI-S interface is enabled, the system will send events as indications to SMI-S clients
so that SMI-S clients can monitor system performance. For information about enabling the SMI-S interface,
see the chapter about configuring the system in the SMU Reference Guide.
The event categories below pertain to FRU assemblies and certain FRU components.
Table 3 Events and corresponding SMI-S indications
FRU/Event category Corresponding SMI-S class
Controller
Hard Disk Drive
Fan
Power Supply
Temperature Sensor HP_OverallTempSensor
Battery/SuperCap
FC Port
SAS Port
ISCSI Port
HP_Controller
HP_DiskDrive
HP_PSUFan
HP_PSU
HP_SuperCap
HP_FCPort
HP_SASTargetPort
HP_ISCSIEthernetPort
HP P2000 G3 MSA System Event Descriptions Reference Guide
Operation status values that would trigger alert
conditions
Down, Not Installed, OK
Unknown, Missing, Error, Degraded, OK
Error, Stopped, OK
Unknown, Error, Other, Stressed, Degraded, OK
Unknown, Other, Error, Non-Recoverable Error,
Degraded, OK
Unknown, Error, OK
Stopped, OK
Stopped, OK
Stopped, OK
45