HP P2000 Reference Manual page 30

299
Info. The controller's real-time clock (RTC) settings were recovered after an unexpected power loss.
Recommended actions
• No action required.
300
Info. CPU frequency has changed to high.
Recommended actions
• No action required.
301
Info. CPU frequency has changed to low.
Recommended actions
• No action required.
302
Info. DDR memory clock frequency has changed to high.
Recommended actions
• No action required.
303
Info. DDR memory clock frequency has changed to low.
Recommended actions
• No action required.
304
Info. The controller has detected I
Informational to note an existence of previous I
Recommended actions
• No action required.
305
Info. A serial number in Storage Controller (SC) flash memory is invalid. The valid serial number will be
recovered automatically.
Recommended actions
• No action required.
306
Info. An old serial number in Storage Controller (SC) flash memory has been updated to a new serial number.
Recommended actions
• No action required.
30
2
C errors that may have been fully recovered. This event is logged as
2
C errors.