HP D7171A - NetServer - LPr Installation Manual page 133

Chapter 10
16. Press Enter to toggle [Disabled] to "Enabled" in the Video Blanking
[Disabled] field.
Setting this feature only provides a blank screen on the HP NetServer's
Monitor, when the Keyboard Lock or Network Server Mode are also
enabled. The screen remains blank until the password is typed and only
applies to the monitor connected to the HP NetServer's embedded video
connection. As with the other features the Video Blanking is dependent
upon, you must set the password before enabling this feature.
17. To use the Hardware Security menu under Security, use the help files
provided with the selections.
18. Select the Esc key to exit this menu.
19. Use the right-arrow key to go to the Exit menu.
20. Choose Exit Saving Changes from the list of exit options, and then press
Enter.
A dialog appears and asks you to confirm your decision.
21. Choose Yes and then press the Enter key.
Then the HP NetServer reboots.
22. To change one of the passwords at a later date, return to the Security menu
and repeat Steps 2 through 7, above, for one or both passwords.
NOTE The HP NetServer allows you to reset the password by toggling
a switch (position 6) in the Configuration Switch Block on the
System board.
Configuring the HP NetServer
125