Installing Mass Storage Devices; Introduction - HP D7171A - NetServer - LPr Installation Manual

4 Installing Mass Storage Devices

Introduction

The HP NetServer standard configuration is:
l
One hot-swap mass storage cage (primary)
Configured with a single SCSI bus
Installed with requested drives
With filler panels in the slots not occupied by drives
l
An enclosure for a second hot-swap mass storage cage (secondary)
l
A flexible disk drive
l
A CD-ROM 32x drive
l
Non-hot-swap mass storage shelves
Flexible
disk drive
CD-ROM
drive
Non-hot-swap
drive shelf
Secondary
hot-swap
cage (requires
upgrade kit)
Figure 4-1. Standard Mass Storage Configuration
Primary
hot-swap
cage
39