Brother RH-9820 Instruction Manual page 51

No.
09 No. of straight bartack stitches
10 No. of round bartack stitches
11 Eyelet pattern
12 Zigzag width adjustment
13 Eyelet deceleration speed (*2)
14 Straight bartack speed (*3)
15 Number of slow start stitches
16 Slow start speed (*4)
*2: The standard eyelet deceleration speed is the value that has been set by parameter No. 01 (sewing speed).
*3: If the sewing speed is set to a speed that is slower than the straight bartack speed, the straight bartack speed used for sewing will be the
same as the normal sewing speed.
*4: If the sewing speed is set to a speed that is slower than the slow start speed, the slow start speed used for sewing will be the same as
the normal sewing speed.
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
Setting
5 - 18 stitches
5 - 17 stitches
1 - 6
(Once
replaced, check the knife number
for the replacement knife and then
select
pattern.)
-1.0 - 1.0 mm
-600 - 0 rpm
1,000 - 2,500 rpm
0 - 3 stitches
400 - 1,500 rpm
Setting range
the knife has been
an appropriate eyelet
RH-9820
Unit Initial value
1
1
1
0.1
100
100
1
100
7 stitches
7 stitches
2
0.0 mm
0 rpm
1,800 rpm
0 stitches
700 rpm
0276B - 0283B
42