Installing The Eye Guard; Setting The Scrap Holder For The Knife - Brother RH-9820 Instruction Manual

3-17. Installing the eye guard

Attach all safety devices before using the sewing machine.
If the machine is used without these devices attached, injury may result.

3-18. Setting the scrap holder for the knife

CAUTION
0377B
Scraps that have been cut by the knife will come out of the
venturi tube (1), so place the venturi tube (1) into a trash can
or similar to catch the scraps.
NOTE:
Do not cover the outlet of the venturi tube (1).
If the outlet is covered, it will not be possible for the
scraps cut by the knife to be recovered, and the scraps
will collect inside the knife base.
0379B
RH-9820
3. INSTALLATION
(1) Eye guard assembly
(2) Plain washers [2 pcs.]
(3) Screws [2 pcs.]
26