5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
5-6. Changing the material setting position
The feed base can be moved forward from the standard material setting position. This can make it easier to set the material in place.
Cycle time will be reduced with this setting, particularly if cutting after sewing is selected.
[To move the feed base forward]
Press the FRONT/BACK key during the standby condition in automatic mode, test mode or manual mode.
0426B
[To move the feed base backward (standard material setting position)]
Press the FRONT/BACK key once more.
0427B
49
The feed base will move forward (to the sewing start position).
The feed base will move backward (to the standard material setting
position).
RH-9820