Brother RH-9820 Instruction Manual page 62

6. USING THE SEWING MACHINE (SEWING OPERATION)
<Clearing the pause (when continuing from the point where sewing was paused)>
1
Press the RESET key.
0437B
2
Eliminate the cause of the problem.
3
Press the key once.
0423B
4
Press the and
•
The key moves forward, and the
•
(The feed will move quicker if you keep the key pressed down.)
5
Press the start switch (1).
0440B
NOTE:
If the STOP switch is pressed before the upper shaft motor starts operating or after it has stopped, it will not be possible to
continue sewing from the point where sewing was paused.
53
The buzzer will stop sounding.
keys to determine the position to resume sewing.
key moves backward.
Automatic sewing will resume.
(The display will change alternately.)
* If a problem such as an upper thread breakage has
occurred, you can press the THREAD key to switch to
threading mode.
* If a problem such as an upper thread breakage has
occurred, you can press the THREAD key to switch to
threading mode.
RH-9820
0438B
0482B
0439B