16. The bushing has a notch removed from the fl ange
end. Align that notch in the bushing with the tab in
the anchor plate (Fig. 219).
A A
A. Tab
Brake Arm Assembly
1. Place the spacer with the large diameter down on
the brake arm (Fig. 220).
WPM Drive Systems Manual
B B
Fig 219
MVC-257
B. Notch
Fig 220
MVC-211
BBC / BOS / BCS
2. Place the bearing with the fl ange side down on the
spacer and place the washer on top of the bearing
(Fig. 221).
3. Install the belt, belt guide, and carriage bolt on the
brake arm and secure with the carriage bolt (Fig.
222).
Fig 221
MVC-213
Fig 222
MVC-216
6-33