Toro 20330 - Low Wheel Walk Power Mower Service Manual page 49

SINGLE SPEED BEVEL GEAR TRANSMISSION
3. Remove the plug from the hole next to where the
self propel cable goes through the chassis (Fig.
062).
4. Tip the mower on its side. The cable snaps in from
the top and connects to an arm on the transmission
belt guide (Fig. 063).
A. Cable
WPM Drive Systems Manual
Fig 062 MVC-735
A A
B B
Fig 063 PICT-1884a
B. Belt guide
5. The cable tool (P/N 105-6819) will compress the
locking tabs on the cable so it can be removed from
the housing.
6. Slide the cable tool over the end of the cable and
push (Fig. 064). At the same time, reach around the
mower and pull the cable out of the housing.
A. Cable tool
7. With the plug removed from the larger hole next to
the cable, move the cable through the slot (Fig. 065).
A A
Fig 064 PICT-1895a
Fig 065 PICT-1904
3-11