SINGLE SPEED BEVEL GEAR TRANSMISSION
Transmission Removal & Belt Replacement
The following steps will show one method of replacing
the belt or removing the transmission on the Lawn-Boy
Insight mowers.
1. Prepare the mower. Drain the gas and oil and
disconnect the spark plug wire.
2. Remove two screws that secure the rear cover (Fig.
090).
3. Remove the 3 belt cover screws (Fig. 091).
3-20
Fig 090
MVC-285
Fig 091
MVC-286
4. The belt cover will drop off the bottom (Fig. 092).
A. Belt cover
5. If you have an electric start model, remove the
battery and battery box.
6. Clamp the axle with a locking pliers and remove the
nut from the transmission pulley. If you are using an
air wrench, you may not need to hold the axle (Fig.
093).
A A
Fig 092
MVC-288
Fig 093
MVC-291
WPM Drive Systems Manual