Mounting The Unit - Bosch NWD-455V03-20P Operating Instructions Manual

22 en | Mounting the unit
3

Mounting the unit

The unit may be surface mounted in two different ways depend-
ing on whether the connection is via the top or the side. Refer
to the dimensions drawing to find the exact position of the
screw holes and the entry hole for the wires.
Solid surface (three
pre-drilled 8mm holes)
Three screws (supplied
with camera)
Integrated camera unit
and base
Fig. 3.1 Surface mounting - side connection
Solid surface (three
pre-drilled 8mm holes)
Three screws (supplied
with camera)
Integrated camera unit
and base
Fig. 3.2 Surface mounting - top connection
V 1.0 | 2006.12
Conduit
Operating Instructions
FlexiDome IP
Mounting plate
Wires
Conduit
Suspension wire
Three screws
(M5, supplied)
Wires
Mounting plate
Cap
Suspension wire
Three screws
(M5, supplied)
Bosch Security Systems