Install Menu - Bosch NWD-455V03-20P Operating Instructions Manual

FlexiDome IP
– Press the menu/select
(center) key to access the
menus or to move to the
next or previous menu.
– Press the menu/select
key for approximately 1.5
seconds to open the
Installer menu.
– Use the up or down keys to scroll through a menu.
– Use the left or right keys to move through options or to set
parameters.
– When in a menu, quickly pressing the menu/select key
twice restores the selected item to its factory default.
4.3.1

Install menu

Function Selection
Network
Exit
Table 4.1 Install menu
Install IP address submenu
To operate the camera in your network, a network-valid IP
address must be assigned. The IP address can also be set
remotely via the Configuration Manager. This SW package is
supplied with the camera on the CD. The factory default IP
address is 192.168.0.1
Function
IP Address
Subnet Mask
Gateway
Exit
Table 4.2 IP address submenu
Bosch Security Systems
Description
Select sub- Select to set the network IP address for the
menu camera (default address is 192.168.0.1)
Exit the menu
Description
Enter an IP address for the camera. Use LEFT/RIGHT to
change position in the address, use UP/DOWN to select
the digit. Use SELECT to exit the address edit screen.
Enter the Subnet mask (default 255.255.255.0)
Enter a Gateway address.
Return to the Install menu
Operating Instructions
Camera set-up | en 27
Up key
Menu/select key
Right key
Down key
Left key
V 1.0 | 2006.12