Jpeg Posting - Bosch NWD-455V03-20P Operating Instructions Manual

FlexiDome IP
7.4.3

JPEG posting

You can save individual JPEG images on an FTP server at certain
intervals. You can then retrieve these images at a later date to
reconstruct alarm events if required.
JPEG format
Select the resolution you wish the JPEG images to have:
– Small 176 × 144/120 pixels (QCIF)
– Medium 352 × 288/240 pixels (CIF)
– Large 704 × 576/480 pixels (4CIF)
File name
You can select how file names will be created for the individual
images which are transmitted.
– Overwrite: The same file name is always used and any
existing file will be overwritten with the current file.
– Increment: A number from 000 to 255 is added to the file
name and automatically increased by 1. When it reaches
255 it starts again from 000.
– Date/time suffix: The date and time are automatically
added to the file name. When setting this parameter,
please ensure that the date and time of the unit are always
correctly set. Example: the file snap021606_124530.jpg
was stored on February 16, 2006 at 12.45 p.m. and 30 sec-
onds.
JPEG posting interval
Enter the interval in seconds at which the images will be sent to
an FTP server. Enter zero if you do not want any images to be
sent.
Bosch Security Systems
Configuration via the browser | en 51
Operating Instructions V 1.0 | 2006.12