Recording Status; Alarm Settings; Alarm Connections - Bosch NWD-455V03-20P Operating Instructions Manual

FlexiDome IP
2. Click Stop to deactivate the recording schedule. Record-
ings that are currently running are interrupted and the con-
figuration can be modified.
7.10.2

Recording status

The graphic indicates the recording activity in this partition. You
will see an animated graphic while recording is taking place.
7.11

Alarm Settings

7.11.1

Alarm connections

You can select the response of the camera when an alarm
occurs. In case of an alarm, the camera can automatically estab-
lish a connection to a predefined IP address (compatible
MPEG-4 compatible hardware receiver or computer with recep-
tion software). You can enter up to ten IP addresses which will
be selected in order by the unit in case of an alarm until a con-
nection is established.
Connect on alarm
Select On so that the camera automatically establishes a con-
nection to a pre-defined IP address in the event of an alarm.
NOTICE!
i
Stream 2 is always transmitted for alarm connections. This
should be taken into account when assigning the profile.
Bosch Security Systems
Configuration via the browser | en 71
Operating Instructions V 1.0 | 2006.12