Encoder Settings; Selecting An Encoder Profile - Bosch NWD-455V03-20P Operating Instructions Manual

46 en | Configuration via the browser
– If you have selected the Custom option, additional
fields are displayed to specify the exact position
(Position (XY):).
2. In the Position (XY): fields enter the values for the desired
position.
Displayed alarm message
Enter the message to be displayed for an alarm. It can contain
up to 31 characters.
Video watermarking
Choose On if the video images transmitted are to be water-
marked. After activation, all images are marked with a small
green rectangle. A red rectangle indicates that the sequence
(live or saved) has been manipulated.
7.4

Encoder Settings

For encoding the video signal, you can select two profiles and
change the presets for the profiles.
7.4.1

Selecting an encoder profile

You can adapt the MPEG-4 data transmission to the operating
environment (for example network structure, bandwidth, data
structures). To do this, the camera simultaneously generates
two data streams (Dual Streaming), for which you can select
different compression settings, for example one setting for
transmissions to the Internet and one for LAN connections.
Pre-programmed profiles are available, which each give priority
to different perspectives.
V 1.0 | 2006.12 Operating Instructions
FlexiDome IP
Bosch Security Systems