Table of Contents
Advertisement
Sense Key
Sense Code/Sub-sense Code : 24-00 = Invalid field in CDB
"VALID" Bit
"ILI" bit
Information Field : ("Transfer byte length in the CDB) – (Original "Transfer byte length")
Remark The calculation formula for the information field expresses 1 logical data block as n
physical sectors and n sub-sectors, and when negative, as a complement of 2.
Error recovery processing during execution of this command is performed in accordance with the
specifications in the MODE SELECT parameters (Page code 1:
Parameter, Page Code 21: Additional Error Recovery Parameter, but the AWRE flag and DTE flag
are not applied.
3.4.7
WRITE SAME (41)
Bit
Byte
0
1
2
3
4
5
6
7
8
9
This command requests that the device server write the single block of data transferred by the
application client to the medium multiple times to consecutive multiple logical blocks.
A "Logical Block data (LBdata)" bit of zero and a "Physical Block data (PBdata)" bit of zero
indicates that the single block of data transferred by the application client shall be used without
modification. A "LBdata" bit of one requests that the device server replace the first four bytes of the
data to be written to the current logical block with the logical block address of the block currently
being written.
A "PBdata" bit of one requests that the device server replace the first eight bytes of the data to be
written to the current physical sector with the physical address of the sector currently being written
using the physical sector format.
C141-E167
: 05 = ILLEGAL REQUEST
: "1"
: "1"
7
6
5
LUN
Logical Block Address (MSB)
Logical Block Address
Logical Block Address
Logical Block Address (LSB)
0
0
0
Number of Blocks (MSB)
Number of Blocks (LSB)
0
0
0
3.4 Maintenance, Diagnostic Commands
Read/Write Error Recovery
4
3
2
X'41'
0
0
PBdata LBdata RelAdr
0
0
0
0
0
0
1
0
0
0
0
Link
3 - 113
Advertisement
Table of Contents
