note
If you want to connect an
external monitor to the
port, your
Monitor Out
computer must be connected
to either the
or
Computer
ports. The
BNC
Monitor
port does not support a
Out
connection.
DVI
Setting Up the Projector
32
Connecting an External Monitor
If you want to monitor your presentation close-up (on a monitor
placed beside the projector) as well as on the screen, you can connect
an external monitor. You can use it to check on your presentation or
switch between picture sources, even if you've pressed the
button to turn off projection on the screen.
To attach an external monitor, connect it to the projector's
port, as shown:
Out
External monitor
Follow these guidelines to view images on the monitor:
■
The monitor displays the image from the currently selected
computer source. Press the
all the active sources at the same time (see page 56).
You can also view images on the monitor while the projector is in
■
Standby mode, if this mode has been enabled (see page 75).
button if you want to display
Preview
A/V Mute
Monitor