Monitoring Your Projectors - Epson PowerLite 7900p User Manual

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors using the
Status, Video Source, and Error icons shown below. This lets you see
which projectors are currently being used, from which source (or port)
they are projecting an image, and if a problem occurs.
Status icon
For detailed status information, select the projector in question and
click .
View details
The following table explains the meaning of the status icons:
Status icons
(green) Projecting; no problems
(dark) Turned off; no problems
(green) Projecting; problems detected
(dark) Turned off; problems detected
Network error (for example, not connected to
network, or power cable disconnected).
You may also see this error if Network OFF is
selected in Standby Mode (see page 75).
Video Source Error icon
icon
Managing the Projector from a Remote Computer
note
To monitor a projector
when it's in standby mode
(plugged in but not turned
on), you must select
as the
Network ON
setting in
Standby Mode
the projector's menu system
(see page 75).
You can monitor up to 64
projectors.
Remember that when
Standby Mode is set to
, the exhaust
Network ON
fan continues to operate
after the projector has cooled
down. This is normal.
93