Adjusting The Image Quality; Adjusting Images From Video Sources - Epson PowerLite 7900p User Manual

note
The setting
Brightness
changes the opacity of the
projector's LCD panels. You
can also adjust the
brightness of the lamp itself.
Select
Brightness Control
in the Advanced2 menu,
then choose or
High Low
(the default setting is
High
Selecting the low brightness
setting extends the life of the
lamp (see page 126).
Fine-tuning the Projector
68

Adjusting the Image Quality

You can use the Video menu to adjust the brightness, sharpness, color,
tint, and contrast. If you're projecting from a computer (but not
through the
DVI
(see page 69).

Adjusting Images from Video Sources

1. Press the
Menu
menu.
Video
You see the Video menu screen. (The actual settings may vary,
depending on the selected input source. The Video menu below is
for a composite video or S-Video source.)
Video Video
Audio Audio
Effect Effect
Setting Setting
User's Logo User's Logo
Advanced1 Advanced1
Advanced2 Advanced2
About About
Reset All Reset All
[ [ ]: Select ]: Select
2. Use the
adjust it as needed:
■
Position
If the image is slightly cut off on one or more sides, it may not
be centered exactly. Use this setting to center it (not available
for RGB video images).
■
Brightness
Lightens or darkens the overall image.
).
■
Contrast
Adjusts the difference between light and dark areas.
port), there are additional adjustments you can make
button on the remote control, then select the
Position Position
Brightness Brightness :
Contrast Contrast :
Color Color :
:
Tint Tint
:
Sharpness Sharpness
Color Mode Color Mode
Video Signal Video Signal
Reset Reset
[ [ ]: Enter ]: Enter
pointer button to highlight the desired option, then
Adjust Adjust
0 0 +
-
0 0
- +
0 0
- +
0 0 +
-
0 0
- +
Select [Dynamic Select [Dynamic ] ]
Select Select [Auto [Auto ] ]
Execute Execute
[Menu]: Exit [Menu]: Exit