2. Click
Register projector
You see this screen:
3. Click
Auto detect
network. Or click
name and network address.
Any projectors found on the network are listed as shown below:
4. Select each projector you want to add by clicking its name, then
clicking the
button. When you're done adding projectors,
Add
click
.
Close
as shown.
to locate projectors currently operating on the
and enter the projector's
Manual registration
Click here
Click here
Managing the Projector from a Remote Computer
note
If Auto detect fails to find
the projector, your projector
may not be connected or
configured correctly for the
network. See page 87.
91