Selecting The Image Source - Epson PowerLite 7900p User Manual

note
To focus and adjust the
image, see page 42. If a
projected image fails to
appear, see page 39 for help.
note
You can also preview all
sources on one screen to help
you select the desired source
(see page 56).
Projecting
38

Selecting the Image Source

Selecting the image source lets you switch between images input from
different pieces of equipment connected to the projector (such as a
computer or DVD player).
If you don't see the image you want, select it using the
buttons either on the projector or the remote control.
The buttons work as follows:
Source
The projector has two
■
button to switch between equipment connected to the
and ports.
DVI
Use the
Video/BNC
connected to the
Video
■ The remote control has six
between equipment connected to the port identified on each
button. (The PowerLite 7900p does not support EasyMP.
Note that the
Computer
input signals (for example, Analog RGB or RGB Video)—so if you
have equipment connected to one of these ports, it's important to
make sure the correct signal is selected to match the equipment you're
using. You can change the input signal settings using the projector's
menu system; see page 74.
buttons. Use the
Source
button to switch between equipment
, , and
S-Video BNC
buttons. Use them to switch
Source
and ports can be set up to use different
BNC
Source
Computer/DVI
Computer
ports.
™
)