Setting A Password - Epson PowerLite 7900p User Manual

note
If a password has already
been set, you see the
Password Protect Release
screen. See "Starting the
Projector with a Password"
on page 82.
Fine-tuning the Projector
80
5. Select the screen(s) on which you want your image to appear:
■ Select
No-Signal Msg.
(instead of a blank screen) when there is no video signal
incoming from the currently selected source. Then select
.
Logo
■ Select
A/V Mute
press the
A/V Mute
.
Enter
6. To display the logo as the startup screen, select the
7. Select
No-Signal Msg.
press .
Enter
8. Press .
Esc
9. To display the logo as the background screen when the A/V Mute
button is press, select the
10. Select and press
Logo
11. When you're finished, press

Setting a Password

1. Press the button on the remote control for about 5
Freeze
seconds until you see the Password Protect menu:
Power ON Protect
Password Timer
Timer
Time-elapsed
User's Logo Protect
Passward
2. Select and press
Password
the password?
[ / ] :Select [
3. Select and press
Yes
4. Hold down the
Num
numeric keypad to enter a 4-digit password.
if you want to display your image
if you want your image to appear when you
button. Then select
and press . Then select
Enter
and press
A/V Mute
.
Enter
to exit the menus.
Menu
Password Protect
: ON OFF
: ON OFF
Set 9999H
: 0H
: ON OFF
Set
. You see the message
Enter
] :Set [Menu] :Exit
.
Enter
key on the remote control and use the
and press
Logo
menu.
Setting
and
Logo
.
Enter
Change