Adjusting The Ringing Volume; Setting The Length Of Alarm Beeps - Sharp AR-F151 Facsimile Operation Manual

Adjusting the Ringing Volume

Adjust the ringing volume of the unit using the procedure below.
Factory setting: 3 (MEDIUM)
Step Press these keys
1
FUNCTION
2
3
or
4
ENTER
STOP
5

Setting the Length of Alarm Beeps

You can select the length in seconds of the alarm beeps following the procedure
below.
Factory setting: 1 (3SEC)
Step Press these keys
1
FUNCTION
2
3
or
4
ENTER
STOP
5
GHI
TUV
STOP
GHI
JKL
STOP
INITIAL SETTINGS
Comments
"OPTION SETTING" will appear in
the display.
"RINGING VOLUME" will appear in
the display.
Press the or key to lower or raise
the volume to the desired level.
"STORED" will appear in the display.
Press the STOP key twice to exit.
Comments
"OPTION SETTING" will appear in
the display.
"BEEP LENGTH" will appear in the
display.
Press the or key to set the alarm
beeps to the desired length or to turn
them off.
"STORED" will appear in the display.
Press the STOP key twice to exit.
2-3