Fax Setup
Setting the Dial Mode
The unit can be used with both touch-tone and pulse telephone lines. Touch-tone uses
tones of different pitches for each number key, while pulse lines use a series of pulses.
Your unit must be set to match the kind of telephone line you are using: touch-tone or
pulse.
Factory setting: 1 (TOUCH-TONE)
Step
Press these keys
1
FUNCTION
2
3
STOP
4
Setting the Number of Recall Times
You can select the number of times the unit will try to recall a busy number. If you
enter 0, the unit will not try to recall. Follow this procedure:
Factory setting: 2
Step
Press these keys
1
FUNCTION
2
3
4
ENTER
STOP
5
2-12
GHI
WXYZ
ABC
or
STOP
GHI
TUV
WXYZ
to
STOP
INITIAL SETTINGS
Comments
"OPTION SETTING" will appear in
the display.
"DIAL MODE" will appear in the
display.
Press 1 for touch-tone, or 2 for pulse.
"STORED" will appear in the display.
Press the STOP key twice to exit.
Comments
"OPTION SETTING" will appear in
the display.
"RECALL TIMES" will appear in the
display.
Enter the number of recall times ("0"
to "9").
"STORED" will appear in the display.
Press the STOP key twice to exit.