Auto Cover Sheet - Sharp AR-F151 Facsimile Operation Manual

Auto Cover Sheet

If you want to send a cover sheet with your fax transmissions regularly, this function is
very useful. This function differs from the Cover Sheet function in two ways. First, the
Cover Sheet function must be programmed before every fax you want to use it with; the
Auto Cover Sheet function will send a cover sheet with every fax transmission unless
you turn it off. No message is included on the cover sheets generated by the Auto
Cover Sheet function. Please note that the Cover Sheet function is the dominant of the
two, so an ideal way to use the two together is to always leave Auto Cover Sheet on,
then use the Cover Sheet function to attach messages or not attach a
cover sheet to certain transmissions.
Use the procedure below to turn the Auto Cover Sheet function on or off:
Factory setting: 2 (OFF)
Step Press these keys
1
FUNCTION
2
3
or
STOP
4
Note: The receiver's name must be programmed in either the Rapid Key or Speed Dial
function for it to appear on the Auto Cover Sheet.
GHI
DEF
ABC
STOP
HOW TO USE THE FAX FUNCTION
Comments
"OPTION SETTING" will appear in
the display.
"AUTO COVER SHEET" will appear in
the display.
Press 1 to turn the function on, or 2 to
turn it off.
Press the STOP key twice to exit.
Sending Documents
4-5