Setting The Tray Paper Size - Sharp AR-F151 Facsimile Operation Manual

Setting the Tray Paper Size

You must program the size of paper you have loaded in the unit so that Receive
Reduce functions can properly adjust the size of documents printed out. Follow the
steps below.
Note: If you are using A4-size paper, you do not need to make any changes, as this is
the factory setting.
Factory setting: 3 (A4)
Step Press these keys
1
FUNCTION
2
3
or
4
or
STOP
5
Notes:
When the unit runs out of paper while receiving a fax:
• If paper of the same size is available in another paper tray, the unit automatically
switches to the other tray and prints the fax.
• Select "4: OTHER" for the tray that you do not want to use for fax printing.
• If same size paper is not available in the other tray, the error message "PAPER OUT
(XX)" appears on the display. The received fax is saved in memory and printed when
you add paper of the proper size.
GHI
ABC
ABC
GHI
DEF
or or
ABC
GHI
DEF
or or
STOP
INITIAL SETTINGS
Comments
"OPTION SETTING" will appear in
the display.
Press 02 and "MAIN CASSETTE" will
appear in the display.
Press 1 for letter, 2 for legal, 3 for A4
size paper or 4 for other sizes.
"STORED" and then "SECOND
CASSETTE" will appear in the display.
Press 1 for letter, 2 for legal, 3 for A4
size paper or 4 for other sizes.
"STORED" will appear in the display.
Press the STOP key twice to exit.
Fax Setup
2-11