Setting Fine Resolution Priority; Setting Up The Unit For Use With A Pc Modem - Sharp AR-F151 Facsimile Operation Manual

Setting Fine Resolution Priority

For most faxing jobs, you will most likely want to specify the resolution. However,
you can also set a default resolution when no setting is made using the
RESOLUTION key. When Fine Resolution Priority is turned on, all faxes will be
sent in Fine Mode unless otherwise specified. To turn on this function, follow the
procedure below:
Factory setting: 2 (OFF)
Step Press these keys
1
FUNCTION
2
3
STOP
4

Setting Up the Unit for Use with a PC Modem

The unit is set to automatically begin reception if you pick up from an extension
telephone and the unit detects a fax tone. However, if you are using a modem on the
same line, you must deactivate this function: otherwise the unit will mistakenly attempt
to receive the transmission from your computer. To turn off the Fax Signal Receive
function, follow the procedure below.
Note: If you turn off the Fax Signal Receive function, be sure to activate the Remote
Reception function. See "Using the Remote Reception Function" on the next
page for details on how to do this.
Factory setting: 1 (ON)
Step Press these keys
1
FUNCTION
2
3
STOP
4
GHI
DEF
ABC
or
STOP
GHI
ABC
ABC
or
STOP
INITIAL SETTINGS
Comments
"OPTION SETTING" will appear in
the display.
"FINE PRIORITY" will appear in the
display.
Press 1 to turn Fine Resolution
Priority on, or 2 to turn it off.
Press the STOP key twice to exit.
Comments
"OPTION SETTING" will appear in
the display.
"FAX SIGNAL RCV." will appear in the
display.
Press 1 to turn Fax Signal Receive
on, or 2 to turn it off.
Press the STOP key twice to exit.
Fax Setup
2-15