Replacing The Power Switch - NEC EXPRESS 5800 ES1400 SERIES Online Service Manual

Replacing the Power Switch

1. Power off the system and remove the left side panel as described earlier in this chapter.
2. Tag and disconnect the power switch cable from the system board.
3. Remove the front panel as described earlier in this chapter.
4. Using a small Phillips-head screwdriver, remove the two screws securing the power switch to
the front of the chassis. Remove the power switch and cable assembly.
Power Switch Cable Connection
Replacing the Power Switch
Power LED
Speaker
Hard Disk Drive LED
Power Switch
Upgrading Your System 4-47