System Management Submenu - NEC EXPRESS 5800 ES1400 SERIES Online Service Manual

System Management Submenu

Feature
Sever Management Info
System Event Logging
Clear Event Log
EMP Password switch
EMP Password
EMP ESC Sequence
EMP Hangup Line String
Modem Init String
High Modem Init String
EMP Access Mode
EMP Restricted Mode Access
EMP Direct Connect/Modem
Mode
Choices Description
Refer to "System Management Info Submenu."
Press
ENTER
Disabled When enabled, system events will be logged by
BIOS and BMC.
Enabled
Yes clears the system event log (SEL) in BMC.
No
Yes
Enables EMP password.
Disabled
Enabled
This field only shows up when EMP password is
[A...Z, 0 9]
enabled.
Refer to Appendix B.
Refer to your modem
documentation.
Refer to your modem
documentation.
Refer to your modem
documentation.
Pre-boot Only Pre-boot Only - EMP is only enabled during power
down through power up to the end of POST. Com 2
is returned to system use at the end of Post when
operating system boots.
Always Active - EMP is always enabled. Com 2
cannot be used by operating system. It is now
Always Active
dedicated for EMP use.
Disabled - EMP is disabled. Com 2 is always
available for system use by console redirection or
operating system
Disabled
If set to Enabled, Power on/off and Reset server
Disabled
controls via EMP are no longer available.
Enabled
Sets how EMP connects to the server. Direct Connect
Direct Connect
means a null modem serial cable directly connects
Modem Mode
COM 2 connector port to the EMP console machine.
Modem mode indicates that a modem is connected
on COM 2 for EMP use.
Your Setting
Configuring Your System 3-13