Set Second Motor, Special Set - Hitachi WJ200 Series Instruction Manual

Set Second Motor, Special Set

If you assign the [SET] function to an intelligent input terminal, you can select
between two sets of motor parameters. The second parameters store an alternate set of
motor characteristics. When the terminal [SET] is turned ON, the inverter will use the
second set of parameters to generate the frequency output to the motor. When
changing the state of the [SET] input terminal, the change will not take effect until the
inverter is stopped.
When you turn ON the [SET] input, the inverter operates per the second set of
parameters. When the terminal is turned OFF, the output function returns to the
original settings (first set of motor parameters). Refer to
Multiple Motors" on page 4–58
Parameters
F002/F202
F003/F203
A001/A201
A002/A202
A003/A203
A004/A204
A020/A220
A041/A241
A042/A242
A043/A243
A044/A244
A045/A245
A046/A246
A047/A247
A061/A261
A062/A262
A081/A281
A082/A282
A092/A292
Option Terminal
Code Symbol
SET Set (select) 2nd
08
Motor data
C001~C007
Valid for inputs:
(none)
Required settings
Notes:
• If the terminal state is changed while the inverter
is running, the inverter continues using the current
set of parameters until the inverter is stopped.
for details.
SET
Parameters
Stop Run
A093/A293
-
A094/A294
-
A095/A295
-
A096/A296
-
b012/b212
-
b013/b213
-
b021/b221
-
b022/b222
-
b023/b223
-
C041/C241
-
H002/H202
-
H003/H203
-
H004/H204
-
H005/H205
-
H006/H206
-
H020~H024/
-
H220~H224
-
H030~H034/
-
H230~H234
Function Name State
ON
OFF
"Configuring the Inverter for
SET
Stop Run
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Description
causes the inverter to use the 2nd set of motor
parameters for generating the frequency output to
motor
causes the inverter to use the 1st (main) set of
motor parameters for generating the frequency
output to motor
Example (requires input configuration—see
page 3–84):
7 6 5 4
See I/O specs on page 4–6.
4−21
SET
3 2 1 L PCS P24
PLC