Panasonic KX-T336 System Reference Manual page 182

Description of Assigning Items
Type
Assigns a type for each trunk group.
Name Assgns a name to each trunk group.
Tenant Assigns the tenant to which each trunk group belongs.
Incoming/Outgoing Assigns each trunk group to incoming only, outgoing only, or both.
Incoming Mode (Day) Assigns the destination for incoming calls during day service.
Incoming Mode (Night) Assigns the destination for calls during night service.
Intercept Routing (Day)
Assigns the destination for Intercept Routing (Day).
Intercept Routing (Night) Assigns the destination for Intercept Routing (Night).
Toll Restriction Level Assigns TRLT (Toll Restriction Level of trunk group).
Toll Restriction Table
Assigns Area/Office code table number for Toll Restriction.
Dialing Plan Selects the dialing plan, selecting 'None" causes no Toll Restriction.
CO-CO Duration Limit Sets the maximum duration for a CO-CO call.
Disconnect Time Sets disconnecting time. This allows the CO time to release its resources
before another call is placed outgoing from the PBX.
Pause Time
Hook Switch Flash Time
Sets the pause time used in speed dialing and hook switch below.
,.
Assigns whether Flash Service is available or not.
If available, set the hooking time (pause length).
Conditions
The aFig@?g items:Type, incoming Mode (Day/Night), Destination (DIL 1 :N Only)
Type and Number, CO Appeaiairti Type can be changed only when all' the trunks
belonging to the trunk group are not in use. If any trunk is used, it is impossible to
change.
Tenant
If U-" . IS displayed here, "System-Operation",
Tenant Service is set to
"No."
Incoming Mode (Day) If "Al7 'DISA," "TAFAS 1" or "TAFAS 2" is selected, the followings are
checked:
AlT: Checks whether ATLC card is equipped or not.
DISA: Checks whether DISA card is equipped or not.
TAFAS 1: Checks whether "System-Operation", External Paging 1 is set
to "Yes."
TAFAS 2: Checks whether "System-Operation", External Paging 2 is set
to "Yes."
9-E-4