World Select 3 (Ws3) - Panasonic KX-T336 System Reference Manual

53.00 World Select 3 (WS3)
Description
WS3' Command provides the following seven assignments.
(Passworo level: Two or higher)
(1) DIL 1: N CO Key Only (PITS only)
It is programmable that an incoming CO call routed via 'DIL 1: N" feature
arrives at "CO button onv or "CO button or PDN button' as follows.
(Parameters)
Y : An incoming CO call routed via DIL 1: N feature only arrives at a PITS
telephone which has associated CO button (SCO, GCO).
If no CO button is assigned on a PlTS, an incoming CO call will not
arrive at that extension.
N : An incoming CO call routed via DIL 1: N feature arrives at CO button
(SCO, GCO) or PDN button.
If no CO button is available on a PITS, an incoming CO call will arrive at
PDN button available. (default)
(2) EXT Off-hook BLF (PITS only)
The status indicator on DSS (DN) button reflects the idle/busy status of the
associated extension user under one of the following settings.
(Parameters)
Y : The status indicator on DSS (DN) button is lighted steadily either v&n
the associated extension user goes off-hook, or when all PDN buttons
are busy. (default) I
N : The status indicator on DSS (DN) button is lighted steadify only when all
PDN buttons on the associated extension are busy.
(3) DTMF-Tone Integration
On extensions with the Voice Mail Port parameter enabled, the KX-T336
system can send codes (DTMF tones) to indicate the state of the call (busy,
answered, ringing, disconnect, etc.) in addition to the normal call progress
tones. These codes enable the Voice Proces6kg system .to imrned&tely
recognize the current state of the call and improve its call handling
performance.
(Parameters)
Y : The KX-T336 system sends codes (DTMF tones) to the VPS.
N : The KX-T336 system does not send codes (DTh4F tones) to the VPS.
(default)
1 O-C-81
(30393)