Panasonic KX-T336 System Reference Manual page 641

3.02 Saving Procedure
Save - Submenu
1 OFL 1 BCK] LIN 1 DIR
----------------------------------------------------------+.---.+----+ ----+.---
1. ALL Data
2. PBX Data
3. ATT1 Local Data
4. ATT2 Local Data
1. First, confirm that the preparations for start of
communication between sender and receiver
have been made, like uniform communication
parameters for sender and receiver etc.
2. Select "2. Save" from the-Backup Utility Main
Menu, then Save-Submenu screen appears
on the screen. (See above)
3. Before selecting an area, prepare the terminal
to receive data.
4. Select the area
(1
to 4) with the submenu.
(Refer to [Submenu Description].)
5. The saving start message "Transfer start"
appears on the screen. Then the selected
data is transferred as ASCII codes from the
Main Unit to the backup device.
6. When saving is finished, the following
message appears on the screen.
"Transfer end"
7. Release the Data Receive mode of the
backup device.
[Submenu Description]
1. All Data . ..Saves all data, system programming
data and attendant console
database (ATT1 and/or ATT2), from
the Main Unit to backup device.
2. PBX Data . ..Saves PBX data (system
programming data) from the Main
Unit to backup device.
3. ATT1 Local Data . ..Saves the database of
attendant console assigned
as ATT1 from the Main Unit
to backup device.
4.
ATT2 Local Data . ..Saves the database of
attendant console assigned
as ATT2 from the Main Unit
to backup device.
16-B-4