Trunk Group 2 (Tg2) - Panasonic KX-T336 System Reference Manual

15.00 Trunk Group 2 (TG2)
Description
This is the second block to assign various data
for trunk groups.
(Password level: Two or higher)
Input Format
Index Number
Index Number
Explanation
01 to 16
Trunk group number
' Input Value for Item Number
tern
4Jti
Assigning Items
Input Value
CLR
01 Destination (DIL 1: N Only)
I X (X : 1 to 8): ICM group number
P XX (XX : 01 to 32) : pickup group number
to
DN XXXX (XXXX : three or four digits): extension number
0 : none
08
(Assignable only when "Incoming Mode (Day)" is set to
DIL 1: N)
09 DID Digit Modification Table
1 to 4 : table number
(Assignable when the Trunk Group type is DID)
10 PBX Access Code
to (No Restriction)
17
18 PBX Access Code
to (Restriction)
25
26 Max. Dial No.
after EFA Signal
27 CO Appearance Type
Maximum three digit numbers
(Assignable when the Trunk Group type is PBX, and CO
0
line access is both way)
Maximum three digits of numbers
(Assignable when the Trunk Group type is PBX, and CO o
line access is both way)
1 to 7 : maximum dialing digits
0 : cannot dial after external feature access
1 : single CO
2 : group CO
Conditions
Refer to Section 1 O-C-l 4.00 'Trunk Group 1 (TGl)."
0:
clearing function is effective
for the item
--
1 o-c-31