Intercom Calling - Panasonic KX-TD308 Installation Manual

I
I
ntercom Calling
Description
Conditions
Programming References
Feature References
Operation References
—User Manual
3-90 Features
Allows the extension user to call another extension user within the
system.
• Extension numbers are assigned to all extensions by System
Programming. An extension number is programmed to be two, three, or
four digits.
• Names can be given to extension numbers by System Programming.
An extension number and a name, if programmed, is shown on the
display proprietary telephone during an intercom call.
• DSS (Direct Station Selection) buttons permit one-touch access to an
extension and provide Busy Lamp Field.
• KX-T7431, KX-T7433, KX-T7436 and KX-T7235 users can make an
extension call with an extension dialing directory on the display.
• After dialing an extension number, the user will hear one of the
following:
Ringback tone: indicates the other extension is being called.
Confirmation tone: indicates the user can perform Voice
Calling.
Busy tone: indicates the other extension is busy.
Do Not Disturb (DND) tone: indicates the other extension has
DND assigned.
Section 4, System Programming
[003] Extension Number Set
[004] Extension Name Set
[005] Flexible CO Button Assignment
[100] Flexible Numbering, 1st through 16th hundred extension blocks
Station Programming.......................................................User Manual
Flexible Button Assignment – Direct Station Selection (DSS) Button
Section 3, Features
Busy Lamp Field
DPT Features, Standard Telephone Features

Intercom Calling

3 Features
Button, Direct Station Selection
(DSS)