First Digit Time - Panasonic KX-TD308 Installation Manual

4.4 Timer Programming
Description
Selection
Default
Programming
Conditions
Feature References

First Digit Time

Sets the maximum time allowed between the start of an outside dial
tone and the first digit dialed on an outgoing outside call. If an
extension user fails to dial any digits during this time, the DTMF
(Dual Tone Multi-Frequency) receiver is released.
Time (seconds): 5 through 120
10 s
1. Enter 207.
Display: 207 1ST DIGIT T
2. Press NEXT.
Display example: Time: 10 sec
3. Enter the time.
To change the current entry, press CLEAR and enter the new time.
4. Press STORE.
5. Press END.
• This timer is used for toll restriction checking.
• You cannot leave the entry empty.
Section 3, Features
Toll Restriction
System Programming
207
4-69