Doorphone Ringing Assignment — Day / Night - Panasonic KX-TD308 Installation Manual

4.8 Extension Programming
Doorphone Ringing Assignment — Day / Night
Description
Selection
Default
Programming
Conditions
Feature References
These programs assign the extensions which will ring when a
doorphone call is received during the day and night modes.
Programmed extensions are also allowed to open the door.
• Jack number: 1 through 8,
( =all jacks, -1 = first part, -2 = second part)
• Enable / Disable
Jack 1-1– Enable; Other jacks – Disable — Day / Night
1. Enter a program address (607 for day or 608 for night).
Display example: 607 DOOR SET DAY
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
To enter jack number 1, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display example: #1-1:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
• For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
• To assign all jacks to one selection, press the
case, the display shows the contents programmed for Jack 1.
• One doorphone can be installed for the system.
Section 3, Features
Door Opener
Doorphone Call
607-608
(-1 / -2),
key in step 3. In this
Night Service
System Programming 4-127