Operator / Manager Extension Assignment - Panasonic KX-TD308 Installation Manual

006

Operator / Manager Extension Assignment

Description
Selection
Default
Programming
Conditions
Feature References
4-26 System Programming
4.2 Manager Programming
Assigns the jack number for a manager and/or operators. The
manager extension can perform System Programming and manager
services. The operators have the ability to perform operator
services.
• OPE-1 (operator 1) / OPE-2 (operator 2) / MNGER (manager)
• Jack number: 1 through 8
Operator 1 – Jack 1;
Operator 2 and Manager – Not stored
1. Enter 006.
Display: 006 OP-1, 2, MGR
2. Press NEXT to program operator 1.
Display: OPE-1:Jack1
To program another item, you can also keep pressing NEXT or PREV
until the desired one is displayed.
3. Enter a jack number.
To assign no operator or manager, press CLEAR.
To change the current entry, press CLEAR and enter the new jack
number.
4. Press STORE.
5. To program another item, press NEXT or PREV.
6. Repeat steps 3 through 5.
7. Press END.
• Up to two operators and a manager can be programmed.
• If the assigned jack is in eXtra Device Port mode, the proprietary
telephone jack is treated as the manager / operator extension.
• If there is no operator or manager, press CLEAR in step 3.
Section 3, Features
Manager Extension Operator