Dial Mode Selection - Panasonic KX-TD308 Installation Manual

4.6 Outside Line Programming
Description
DTMF: The dialing signals from an extension, either tone or pulse, are
Call blocking: If your central office can receive both DTMF and pulse signals but
Selection
Default
Programming

Dial Mode Selection

Each outside line can be programmed for DTMF (Dual Tone Multi-
Frequency), pulse (rotary) or call blocking. This program assigns
your choice to each line.
converted to tone signals and transmitted to the outside line.
Pulse: The dialing signals from an extension, either tone or pulse, are
converted to pulse signals and transmitted to the outside line.
you are contracted for pulse, select this mode. When dialing on the
line with a touch tone telephone, only the pulse signals are sent to
the outside line.
• Outside line (CO) number: 1 through 3,
• DTMF / Pulse / C. Block (call blocking)
All outside lines – DTMF
1. Enter 402.
Display: 402 DIAL MODE
2. Press NEXT.
Display: CO Line NO?
3. Enter an outside line number.
To enter outside line number 1, you can also press NEXT.
Display example: CO1:DTMF
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
7. Repeat steps 4 through 6.
8. Press END.
( =all outside lines)
System Programming
402
4-95