Reverse Circuit Assignment - Panasonic KX-TD308 Installation Manual

4.6 Outside Line Programming
Description
Selection
Default
Programming
Conditions
Feature References

Reverse Circuit Assignment

Enables or disables Reverse Circuit detection.
• Outside line (CO) number: 1 through 3,
• Regular (no detection) / Reverse (detection)
Regular
1. Enter 416.
Display: 416 REV. CURRENT
2. Press NEXT.
Display: CO Line NO?
3. Enter an outside line number.
To enter outside line number 1, you can also press NEXT.
Display example: CO1:Regular
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all outside lines to one selection, press the
In this case, the display shows the contents programmed for outside line
1.
Section 3, Features
Reverse Circuit
( =all outside lines)
key in step 3.
System Programming
416
4-109