Checking the normal indicating unit
The following is an example to change the main indicating unit (UNIT1) from % to ml/s.
In the case of sub unit (UNIT2), select the function "B2: UNIT 2."
Switch operation
B1: UNIT 1
B1: UNIT 1
B1: UNIT 1
B1: UNIT 1
B1: UNIT 1
B1: UNIT 1
B1: UNIT 1
Note 1: Volumetric unit is displayed cyclically as follows:
%
qt
Note 2: Time unit is displayed cyclically loops as follows:
/s
Display example
Select B1: UNIT 1 from the setting item selection menu.
The currently set main indicating unit (% in this example)
%
appears.
The cursor appears.
%
Change the volumetric unit to ml. (Note 1)
ml
B
Move the cursor to the position of time unit.
ml
B
Change the time unit to s. (Note 2)
ml/s
The display blinks and the set value is displayed for
confirmation.
Press
ml/s
disappears and the display returns to the condition that the
setting value is displayed.
Returns to the menu of setting item selection.
m
3
l
pt
RANGE
/min
- 67 -
Description
again to write the data. Then the cursor
MENU/ENT
ml
COUNT
/h
/d
6F8A0917
gal
bbl
m/s
ft/s
(Space)