Display Format - Toshiba L5232 Instruction Manual

Note : There is not this screen to the converter before serial No.072320999.
( Menu screen is displayed. Menu lock cancellation screen is not displayed. )
Switch

7.2 Display Format

In the measurement mode, the measured data is displayed in the unit set by UNIT 1 and UNIT 2 in the
setting mode. (To set the unit, see 8.2.6 " Normal Indicating Unit ")
Measured value display format
(1) Flow velocity value and instantaneous flow rate display
- 1 0 . 0 0
• Returns the screen from the parameter display screen to the menu display
screen.
• Returns the screen from the parameter input screen (Cursor ON) or
adjustment wait screen to the parameter display screen.
• Cancels the parameter input check screen (screen blinks) and returns to the
parameter input screen.
• If pressed while menu display screen is displayed, Function [MEAS MODE]
to return to the measurement mode appears.
(If MENU/ENT is pressed under that condition, the mode returns to the
measurement mode.)
Displayed in the unit set by UNIT 2
m l / s
- 40 -
Basic function
Displayed in the unit set by UNIT 1
In the case of total count display,
"C" appears while counting is in
progress.
While communication is in
progress, " " appears.
4 significant digits (for the span flow rate)
Time unit
Flow unit
Numeric value is indicated in 7 digits including a
decimal point. (Up to 9999999)
Flow direction: Forward direction " " (blank)
Reverse direction " − "
6F8A0917