Display Format - Toshiba LF620 Instruction Manual

7.2 Display Format

In the measurement mode, the measured data is displayed using the menu items set by the Display 1
(DSPL1) and Display 2 (DSPL2).
(For display settings, see 8.2.6 "Display Setting.")
・ F low rate / Flow velocity display
- 1 0 . 0 0
m / s
・ T otalized flow count display
1 2 3 4 5 6 7 8
F R D
・ T otalized flow volume display
1 2 3 4 . 5 6 7
F R D m
・ T otalized difference flow volume display
1 2 3 4 . 5 6 7
+ m
Numeric value･･･7 digits maximum including a decimal point are
Unit･･･
Flow direction･･･In the case of reverse direction, "−"is displayed.
Numeric value･･･8 digits maximum
Operation･･･ Counting in progress:
Counting direction･･･
In the case of forward flow direction, "FRD" is displayed.
In the case of reverse flow direction, "REV" is displayed.
Numeric value･･･8 digits maximum including a decimal point are
3
Unit･･･
Operation･･･ Counting in progress:
Counting direction･･･
In the case of forward flow direction, "FRD" is displayed.
In the case of reverse flow direction, "REV" is displayed.
Numeric value･･･8 digits maximum including a decimal point are
3
Unit･･･
Operation･･･
Sign･･･
In the case the difference flow is in the forward direction, "+" is
displayed
In the case the difference flow is in the reverse direction, "−" is
displayed
− 37 −
6 F 8 A 0 9 2 7
displayed. (Up to 9999999)
4 significant digits (for the set span)
7 digits maximum are displayed.
In the case of forward direction, not displayed.
(Up to 99999999)
is blinked
Counting stopped: ■ is displayed
displayed. (Up to 99999999)
Displayed to the least significant digit of the set
count rate.
3 digits maximum are displayed.
is blinked
Counting stopped: ■ is displayed
displayed. (Up to 99999999)
Displayed to the least significant digit of the set
count rate.
3 digits maximum are displayed.
Counting in progress: is blinked
Counting stopped: ■ is displayed