Lenovo 10B0 Maintenance Manual page 156

7. Remove the four screws that secure the solid-state drive to the bracket. Then, slide the drive as shown
to remove it from the bracket.
Figure 88. Removing the solid-state drive from the bracket
8. Take the new solid-state drive out of the static-protective package.
9. Slide the new solid-state drive into the solid-state drive bracket as shown until the four holes in the
drive are aligned with the corresponding holes in the bracket. Then, install the four screws to secure the
new solid-state drive to the bracket.
Figure 89. Installing the solid-state drive into the bracket
150
ThinkCentre M73 Hardware Maintenance Manual