Lenovo 10B0 Maintenance Manual page 189

Installing the front Wi-Fi antenna
To install the front Wi-Fi antenna, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Remove the computer cover. See "Removing the computer cover" on page 136.
3. Remove the front bezel. See "Removing and reinstalling the front bezel" on page 136
4. Peel off the paper that protects the sticker on the front Wi-Fi antenna.
Figure 134. Peeling off the paper that protects the sticker
5. Stick the front antenna to the front panel as shown. Then insert the front antenna cable through the
hole in the front panel.
Figure 135. Installing the front WiFi antenna
.
Chapter 10 Replacing FRUs (machine types: 10B4, 10B5, 10B6, and 10B7)
183